Shisham Stanley

You are here: Home Divisions Shisham Bracing Service Bulletin

Service Bulletin

Shisham Prop Repair

E-mail Print

With Shisham's expert prop service and repair team - you relieve yourself of the task of servicing your own props. With 20+ years of manufacturing and servicing props you can put your mind at ease that Shisham's team will get the job done.

 

We offer an inspection service for existing Shisham props, whereby we will provide you with a written report on our findings.  This is at a cost of $7.00 per prop.  This fee covers the inspection only.

 

Should the prop then require servicing (assuming it is in a state fit for servicing at the conclusion of our inspection), the service fee will be an additional amount of $4.00 per prop.

 

Please see below for additional costs that may or may not be incurred, should any other repairs/parts be required.

 

Transport/freight of the props to and from our office in Dandenong will be at the cost of the client.

Read more...
 

Manufacturers Guidance Notes

E-mail Print
We are finding that there is occurring in the field a habit to drop large prop/panel braces from height and the mass/velocity of the outer section impacting onto the inner section is damaging the shaft of the bolts which retain the feet on the panel brace. The impact can also cause damage to the welds retaining the sockets and the adjustable thread. This may cause a problem in the field if the units are not inspected after each use as described in the AS3850 standards.
Read more...
 

Panel Brace Inspection Sheet

E-mail Print
STARTING WITH THE INNER SECTION FIRST DO THE FOLLOWING.

1. Check the weld on the inner foot.

2. Check the bolt on the inner foot. Check that the nut is tight on bolt. Look for impact damage on bolts which can occur when the Brace is dropped from height. If damaged replace immediately with Structural Steel grade 8.8 bolts and Nyloc Nut to suit. DO NOT REUSE PARTS.
Read more...
 

Maintenance Procedures for Servicing Shisham Square Push Pull Props

E-mail Print
All hire props returned at end of hire are required to undergo a maintenance check carried out by Shisham employees trained in maintenance and manufacture of the original square props before they are placed back in the hire stock.

The following procedures are required to be followed to ensure the hire stock is at a safe and satisfactory working condition.
Read more...
 

Shisham Stanley Group

Office: 1 Bennet St,
Dandenong, Victoria, 3175
Phone: (03) 9791 4622
Fax: (03) 9792 4854
Email:

Most Popular

Latest Updates